设为首页加入收藏

某艇用发动机冷却系统分析及优化

作者:齐宝丹,侯帅,蒋剑雄,石魁,李荣玖,王荣博,李春锋  发布时间:2023-12-12   编辑:赵玉真   审核人:郎伟锋    浏览次数:

某艇用发动机冷却系统分析及优化

齐宝丹1,2,侯帅1,2,蒋剑雄1,3,石魁1,2,李荣玖3,王荣博1,2,李春锋1,3

1.内燃机可靠性国家重点实验室,山东 潍坊  261061;2.潍柴动力股份有限公司,山东 潍坊  261061;

3.潍柴重机股份有限公司技术中心,山东 潍坊  261108

摘要:为解决某高速艇用发动机水温高、中冷后气温高及变速箱润滑油温高的问题,进行故障艇系泊试验、航行试验及首台样艇测试分析,排查故障原因;利用Creo三维设计软件提取管路流体域,导入Simerics MP+软件进行模型处理及参数设置,建立海水冷却系统仿真模型,设计不同管路方案,进行压降分析。优化海底门、海水管路、海水过滤器结构,进行系泊试验与航行试验验证。结果表明:发动机水温高的根本原因是海水泵前管路压降大;将海底门、海水管路、海水过滤器直径由65 mm增大为80 mm,可以降低该艇冷却系统海水泵前管路压降,发动机水温、中冷后气温和变速箱润滑油温都在合理范围内,解决故障问题。

关键词:艇用发动机;水温高;海水泵;海底门

Analysis of the cooling system for a marine engine and its optimization

QI Baodan1,2, HOU Shuai1,2, JIANG Jianxiong1,3, SHI Kui1,2,LI Rongjiu3, WANG Rongbo1,2, LI Chunfeng1,3

1. State Key Laboratory of Engine Reliability,Weifang 261061,China;

2. Weichai Power Co., Ltd.,Weifang 261061,China;

3.R&D,Weichai Heavy Machinery Co.,Ltd.,Weifang 261108,China

Abstract:In order to solve the high temperature problems of cooling water, intercooling intake gases and lubricating oil for a high-speed boat, mooring tests, navigation tests, and testing analysis of the first sample boat are conducted to identify the source of the problem. The fluid domain of the pipeline is extracted using Creo software, and then imported into Simerics MP+software for model processing and parameter settings, a simulation model of the seawater cooling system is established. Pressure drop of different pipeline schemes is analysed. The structure of the sea gate, seawater pipeline and seawater filter are optimized and validated by mooring and navigation tests. The results indicate that the main cause of high temperature is the large pressure drop in the pipeline before the seawater pump. Increasing the diameter of the sea gate, seawater pipeline, and seawater filter from 65 mm to 80 mm could reduce the pressure drop in the seawater pump front pipeline of the ship′s cooling system, and keep the engine water temperature, intercooling temperature, and gearbox lubricating oil temperature within a reasonable range.

Keywords:submarine engine;high water temperature; sea water pump; submarine gate

    

通信地址:济南市长清大学科技园海棠路5001号 邮编:250357
《山东交通学院学报》编辑部电话:0531-80687340
《内燃机与动力装置》编辑部电话:0531-80687025
山东交通学院学报编辑部版权所有 网站浏览次数: